diff --git a/include/common/crowpanel_pins.h b/include/common/crowpanel_pins.h deleted file mode 100644 index 99784a1..0000000 --- a/include/common/crowpanel_pins.h +++ /dev/null @@ -1,98 +0,0 @@ -#ifndef CROWPANEL_PINS_H -#define CROWPANEL_PINS_H - -// ============================================================================= -// CrowPanel 5.0" ESP32-S3 Pin Definitions -// ============================================================================= - - -// Display Interface (RGB Parallel) - Reserved, do not use -#define TFT_DE_PIN 40 -#define TFT_VSYNC_PIN 41 -#define TFT_HSYNC_PIN 39 -#define TFT_PCLK_PIN 0 -// RGB Data pins (R0-R4, G0-G5, B0-B4) - pins 1,3,4,5,6,7,8,9,14,15,16,21,45,46,47,48 - -// Touch Interface (I2C) - Reserved, do not use -#define TOUCH_SDA_PIN 19 // GT911 I2C SDA -#define TOUCH_SCL_PIN 20 // GT911 I2C SCL -#define TOUCH_INT_PIN -1 // Touch interrupt (if used) -#define TOUCH_RST_PIN -1 // Touch reset (if used) - -// Backlight Control -#define TFT_BL_PIN 2 // PWM backlight control - -// Available GPIO pins for external connections -// These pins are available on the CrowPanel expansion connectors - -// Primary GPIO expansion (high priority usage) -#define GPIO_AVAILABLE_1 1 // Available for LED strip or buttons -#define GPIO_AVAILABLE_2 3 // Available for LED strip or buttons -#define GPIO_AVAILABLE_3 8 // Available for buttons -#define GPIO_AVAILABLE_4 9 // Available for buttons -#define GPIO_AVAILABLE_5 10 // Available for buttons -// #define GPIO_AVAILABLE_6 11 // Available for -#define GPIO_AVAILABLE_7 12 // Available for buttons -#define GPIO_AVAILABLE_8 13 // Available for buttons - -// Secondary GPIO expansion (if more pins needed) -#define GPIO_AVAILABLE_9 17 // Alternative GPIO -#define GPIO_AVAILABLE_10 18 // Alternative GPIO -#define GPIO_AVAILABLE_11 33 // Alternative GPIO -#define GPIO_AVAILABLE_12 34 // Alternative GPIO -#define GPIO_AVAILABLE_13 35 // Alternative GPIO -#define GPIO_AVAILABLE_14 36 // Alternative GPIO -#define GPIO_AVAILABLE_15 37 // Alternative GPIO -// #define GPIO_AVAILABLE_16 38 // Alternative GPIO - -// Power pins -#define POWER_3V3 3.3 // 3.3V supply -#define POWER_5V 5.0 // 5V supply -#define POWER_GND 0 // Ground - -// ============================================================================= -// Application-Specific Pin Assignments -// ============================================================================= - -// LED Strip (WS2812B) -#define LED_STRIP_PIN GPIO_AVAILABLE_1 // GPIO 1 - -// Wheel Buttons - Main buttons -#define WHEEL_B1_PIN GPIO_AVAILABLE_2 // GPIO 3 -#define WHEEL_B2_PIN GPIO_AVAILABLE_3 // GPIO 8 -#define WHEEL_B3_PIN GPIO_AVAILABLE_4 // GPIO 9 -#define WHEEL_B4_PIN GPIO_AVAILABLE_5 // GPIO 10 - -// Wheel Button LEDs -#define WHEEL_B1_LED_PIN GPIO_AVAILABLE_6 // GPIO 11 -#define WHEEL_B2_LED_PIN GPIO_AVAILABLE_7 // GPIO 12 -#define WHEEL_B3_LED_PIN GPIO_AVAILABLE_8 // GPIO 13 -#define WHEEL_B4_LED_PIN GPIO_AVAILABLE_9 // GPIO 17 - -// Paddle Shifters -#define PADDLE_LEFT_PIN GPIO_AVAILABLE_10 // GPIO 18 -#define PADDLE_RIGHT_PIN GPIO_AVAILABLE_11 // GPIO 33 - -// Rotary Encoders -#define ENCODER1_A_PIN GPIO_AVAILABLE_12 // GPIO 34 -#define ENCODER1_B_PIN GPIO_AVAILABLE_13 // GPIO 35 -#define ENCODER1_BTN_PIN GPIO_AVAILABLE_14 // GPIO 36 - -#define ENCODER2_A_PIN GPIO_AVAILABLE_15 // GPIO 37 -#define ENCODER2_B_PIN GPIO_AVAILABLE_16 // GPIO 38 -#define ENCODER2_BTN_PIN GPIO_AVAILABLE_1 // Reuse if needed - -// ============================================================================= -// Hardware Validation -// ============================================================================= - -// Ensure critical pins are not conflicting -#if LED_STRIP_PIN == CAN_TX_PIN || LED_STRIP_PIN == CAN_RX_PIN -#error "LED Strip pin conflicts with CAN interface" -#endif - -#if TOUCH_SDA_PIN == WHEEL_B1_PIN || TOUCH_SCL_PIN == WHEEL_B1_PIN -#error "Wheel button pins conflict with touch interface" -#endif - -#endif // CROWPANEL_PINS_H \ No newline at end of file diff --git a/include/common/display_id.hpp b/include/common/display_id.hpp deleted file mode 100644 index 731c355..0000000 --- a/include/common/display_id.hpp +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef DISPLAY_ID_HPP -#define DISPLAY_ID_HPP - -#define DISPLAY_0_ID 0x00 -#define DISPLAY_1_ID 0x01 -#define DISPLAY_2_ID 0x02 -#define DISPLAY_3_ID 0x03 -#define DISPLAY_4_ID 0x04 - -#define RPM_ID 0x51 //RPM -#define ECT_IN_ID 0x52 //Temperatura entrada del radiador -#define GEAR_ID 0x53 //Marcha -#define TPS_ID 0x54 //Posición pedal acelerador -#define BPS_ID 0x55 //Presión de freno -#define BVOLT_ID 0x56 //Voltaje de batería -#define LAMBDA_ID 0x57 //Lambda -#define LR_WS_ID 0x58 //Velocidad de rueda LR -#define RR_WS_ID 0x59 //Velocidad de rueda RR -#define LF_WS_ID 0x60 //Velocidad de rueda LF -#define RF_WS_ID 0x61 //Velocidad de rueda RF -#define ECT_OUT_ID 0x62 //Temperatura salida del radiador -#define IAT_ID 0x63 //IAT -#define MAP_ID 0x64 //IAT -#define AFR_ID 0x65 //Target Lambda -#define CAN1_ID 0x66 //CAN_DIG#1 -#define CAN2_ID 0x67 //CAN_DIG#2 -#define CAN3_ID 0x68 //CAN_DIG#3 -#define CAN4_ID 0x69 //CAN_DIG#4 -#define CAN5_ID 0x70 //CAN_DIG#5 -#define CAN6_ID 0x71 //CAN_DIG#6 -#define TEMP_WARNING 0x72 //Warning de temperatura -#define OIL_TEMP_ID 0x73 //Temperatura de aceite -#define FUEL_PRESSURE_ID 0x74 //Presión de combustible - -#endif \ No newline at end of file